| Home | HOME | CONTACT US | ADVERTISE | ABOUT US | SPONSORSHIP | RESOURCES | 8/1/2014 |  

:: NEWS ARCHIVE
11-11-04 (1)
2001-05 (29)
2001-06 (24)
2001-07 (28)
2001-08 (30)
2001-09 (41)
2001-10 (33)
2001-11 (34)
2001-12 (23)
2002-01 (29)
2002-02 (31)
2002-03 (45)
2002-04 (46)
2002-05 (23)
2002-06 (18)
2002-07 (30)
2002-08 (26)
2002-09 (36)
2002-10 (46)
2002-11 (29)
2002-12 (14)
2003-01 (6)
2003-03 (7)
2003-04 (15)
2003-05 (15)
2003-06 (11)
2003-08 (13)
2003-09 (31)
2003-10 (29)
2003-11 (24)
2003-12 (15)
2004-01 (17)
2004-02 (20)
2004-03 (21)
2004-04 (18)
2004-05 (24)
2004-06 (23)
2004-07 (25)
2004-08 (30)
2004-09 (25)
2004-10 (23)
2004-11 (14)
2004-12 (24)
2005-01 (12)
2005-02 (26)
2005-03 (38)
2005-04 (13)
2005-05 (25)
2005-06 (16)
2005-07 (20)
2005-08 (18)
2005-09 (20)
2005-10 (17)
2005-11 (6)
2005-12 (18)
2006-01 (16)
2006-02 (16)
2006-03 (23)
2006-04 (19)
2006-05 (16)
2006-06 (7)
2006-07 (12)
2006-08 (6)
2006-09 (17)
2006-10 (16)
2006-11 (4)
2006-12 (6)
2007-01 (25)
2007-02 (22)
2007-03 (16)
2007-04 (25)
2007-05 (23)
2007-06 (27)
2007-07 (16)
2007-08 (21)
2007-09 (15)
2007-10 (23)
2007-11 (18)
2007-12 (26)
2008-01 (24)
2008-02 (30)
2008-03 (26)
2008-04 (21)
2008-05 (28)
2008-06 (21)
2008-07 (19)
2008-08 (16)
2008-09 (23)
2008-10 (27)
2008-11 (10)
2008-12 (10)
2009-01 (24)
2009-02 (14)
2009-03 (18)
2009-04 (28)
2009-05 (25)
2009-06 (24)
2009-07 (18)
2009-08 (12)
2009-09 (29)
2009-10 (24)
2009-11 (15)
2009-12 (22)
2010-01 (26)
2010-02 (18)
2010-03 (26)
2010-04 (28)
2010-05 (29)
2010-06 (31)
2010-07 (14)
2010-08 (8)
2010-09 (24)
2010-10 (39)
2010-11 (14)
2010-12 (19)
2011-01 (19)
2011-02 (32)
2011-03 (25)
2011-04 (26)
2011-05 (31)
2011-06 (11)
2011-07 (13)
2011-08 (22)
2011-09 (31)
2011-10 (28)
2011-11 (23)
2011-12 (16)
2012-01 (32)
2012-02 (30)
2012-03 (29)
2012-04 (34)
2012-05 (23)
2012-06 (23)
2012-07 (24)
2012-08 (18)
2012-09 (35)
2012-10 (35)
2012-11 (14)
2012-12 (18)
2013-01 (20)
2013-02 (22)
2013-03 (15)
2013-04 (13)
2013-05 (22)
2013-06 (27)
2013-07 (15)
2013-08 (17)
2013-09 (23)
2013-10 (27)
2013-11 (21)
2013-12 (5)
2014-01 (14)
2014-02 (13)
2014-03 (19)
2014-04 (28)
2014-05 (21)
2014-06 (23)
2014-07 (14)

:: SEARCH
  

:: ADVERTISE

FUJIFILM Dimatix introduces SG-1024 industrial single-pass printhead and adds RediJet™ jetting technology to its printhead line-up for drupa 2012.

Santa Clara, CA; March 5, 2012– FUJIFILM Dimatix, Inc., the world’s leading supplier of drop-on-demand inkjet printheads for industrial applications, will exhibit its comprehensive range of industrial inkjet solutions on the Fujifilm booth in Hall 8b at drupa 2012
(Dusseldorf, Germany May 3rd - 16th), within the specially designated
‘Technology Leadership Zone’.

FUJIFILM Dimatix will use drupa 2012 to display its extensive printhead product line for wide format graphics, commercial printing, decorative and material deposition applications. Visitors to the stand will see a select range of material deposition systems, including the DMP-2831 and DMP-3000, designed for fluids, process and product development for diverse applications including printed electronics.

The company will also use the show to introduce and demonstrate its new SG-1024/M-- a high nozzle density, drop-on-demand, inkjet printhead designed specifically for demanding industrial single-pass printing and decorative applications.

The strength of the SG-1024 lays with its easy to integrate, high performance repairable construction that combines superior jetting performance in a compact, self-contained design.
Each printhead has 1024 independent jets arranged in 8 rows, each with 128 channels.

With a singular, durable metal nozzle plate, the first model, the SG-1024/M has a nominal 20-30 picoliter drop size (fluid-dependent) and is compatible with aqueous, oil-based ceramic inks and associated maintenance fluids.
When combined with VersaDrop™ jetting technology, this printhead has full grayscale operation with drop sizes to 80 picoliters.

The SG-1024/M incorporates Dimatix’ new RediJet jetting technology. RediJet consolidates several breakthough innovations such as unique nozzle plate design, special conformal and non-wetting surface coatings, enhanced on-head electronics, ink recirculation and waveforms tailored to specific fluids.

RediJet unlocks the full productive capacity of a printhead while lowering the recurring service cost. The defining characteristic of this technology is minimizing initial start-up and ongoing maintenance times along with reducing associated fluid consumption, especially when using faster drying and/or heavily pigmented ink formulations like those found in high-speed, industrial, single-pass systems. As the name invokes-- RediJet is ‘ready to jet’ when you are and is a key enabler of SG-1024 based high speed, industrial single-pass inkjet system designs.

FUJIFILM Dimatix will also display its ‘SAMBA™’ MEMS printhead on a chip technology - a core component used within the ‘Jet Press 720’. Developed jointly by FUJIFILM Dimatix and FUJIFILM Corporation, SAMBA is an extensible ‘printhead on a chip technology’. It is analogous to the evolution of the Integrated Circuit (IC) from a single chip with limited functionality to Large Scale Integration (LSI) incorporating thousands of integrated functions. This breakthrough in printhead design results in the potential of achieving the packing density and cost of Thermal Inkjet (TIJ), with the high throughput of Continuous Inkjet (CIJ), yet providing the operational flexibility associated with Piezo Inkjet (PIJ).

About FUJIFILM Dimatix

FUJIFILM Dimatix, Inc., the world’s leading supplier of drop-on-demand inkjet printheads for industrial applications, is driving a revolution in inkjet technology to support a new generation of products for printing, industrial product decoration and materials deposition. The company’s innovative inkjet technology and world-class fabrication techniques enable OEMs, system integrators and manufacturers to build cutting-edge systems and manufacturing processes for high-performance, precision printing of traditional inks and deposition of functional fluids on all types of surfaces, including flexible substrates.

A wholly owned subsidiary of FUJIFILM Corporation, FUJIFILM Dimatix, Inc. is headquartered in Santa Clara, California and maintains U.S. product development and manufacturing operations in California and New Hampshire. The company sells and supports its products worldwide through offices in the United States, Europe, Japan, Korea, China, Taiwan and Singapore. For more information, visit www.dimatix.com.

Editor
3/5/2012


:: home :: :: up :: :: back ::

:: NEWS
INX Sacramento attains Platinum Sustainability status.
Xanté showcases the latest in digital printing technology at drupa 2012.
MACtac® Announces Application NationTM Session Dates for 2012.
Phoseon Technology Announces Upcoming Live Webinar: UV LED Curing for Screen Printing.
ISA International Sign Expo 2012 Wraps Up in Orlando.
ISA INTERNATIONAL SIGN EXPO 2012 WRAPS UP IN ORLANDO.
FESPA Hall of Fame 2012 winners per country announced . . .
Enfocus announces drupa 2012 presence.
(Total # of news: 29)
Next ::>  

 

| HOME | CONTACT US | ADVERTISE | ABOUT US | SPONSORSHIP | RESOURCES |

PRINTHEAD.NET Copyright © 2002 - PfuiCorp. All rights reserved.